Most Popular Professional Audio Processor 16 Channel Dante 16*16 Digital Mixer Audio Matrix
Main Features:
- USB Background music playback and recording function
- Support mobile phone, tablet control and distributed cloud control
- DSP audio processing, built-in automatic mixer, feedback elimination(AFC), echo elimination(AEC), noise elimination (ANC) function
- Input per channel:Front stage amplifier, signal generator, expander, compressor, 5 stage parameter equalization
- Output per channel:31 Section diagram equalizer, delay device, frequency divider, limiter
- Full function matrix remix
- Built-in automatic camera tracking function
- Support for scenario presets；
- Automatic memory protection when power off
- 1U Whole aluminum chassis
- Built in Dante Module
Description:
The MX-1616D audio processor is a freely designed audio processing and control system.It adopts advanced DSP processing technology, has a new automatic mixing, Feedback elimination, etc, targeted to solve various practical problems in the application scene.
① Ground screw: The internal circuit of the equipment is grounded through this screw
② POWER interface: connect the 100~220V AC power supply, and a rocker switch.
③ Network control interface: debug and monitor the device by connecting to the network port.
④ RESET: Long press the reset button to restore factory Settings and restart the processor
⑤ RS232+ RS485+GPIO Control Interface: Connect control terminal or central control device to send and receive control command.
⑥ Dante network interface: For accessing Dante audio networks
⑦ Signal output interface: connection amplifier, active speaker and other equipment.
⑧ Signal input interface: connect the microphone, DVD and other equipment.
Specification:
| Model No. | MX-1616D | | DSP Processing | Ti 456MHz FLOPS DSP | | Number of analog channels | 16 Input + 16Output | | Number of Dante channels | 16 Input + 16 Output | | Core Algorithm | Automatic mixing, feedback elimination(AFC), echo elimination(AEC), noise elimination(ANC) | | GPIO | 8 ( Including input and output) | | RS232/RS485 | 1 | | RJ45 control interface | 1 | | USB Port | 1 | | DANTE network interface | 2 | | Simulated maximum gain | 51dB | | Digitalizing bit | 24bit | | Sampling Rate | 48k | | Frequency Response(20~20KHz) | ±0.2dB | | Total harmonic distortion + noise | ＜0.003% @1KHz ,4dBu | | Floor noise (A- weighted) | -90dBu | | Delay storage | 2s | | Analog input to output system delay | 3ms | | Input impedance (balance -type) | 20KΩ | | Output impedance (balance -type) | 100Ω | | Maximum Input Level | +18dBu,balance | | Maximum Output Level | +18dBu,balance | | Equivalent input noise EIN(20-20kHz,A-weighted). | ≤-131dBU | | Phantom power (per input) | 48V | | Input common mode rejection,60Hz | 70dB | | Channel Isolation,1kHz | 104dB | | Dimensions (W*D*H) | 482*258*45(mm) | | Weight | 3Kg | | Power Consumption | <40W | | Operating Temperature | -10 - 50℃ | | Working Power Supply | AC110V-220V,50Hz/60Hz | |
